Create your own custom fishing weights with this versatile bank sinker mold! Featuring 5 cavities that produce 4, 8, and 12-ounce sinkers, this mold gives you everything needed to make professional-quality fishing weights at home. The detailed instructions walk you through the entire process from melting scrap lead to pouring perfect sinkers every time. Important safety note - always wear protective clothing when working with molten lead, and make sure your mold is completely dry to prevent dangerous steam explosions. The process involves melting scrap lead to about 650 degrees, skimming off impurities, pouring into preheated molds, and using coat hanger wire for creating holes in center-weighted sinkers. After about 10 seconds, you remove the wire, open the mold, and trim any excess lead for clean, ready-to-use sinkers. Remember that lead is toxic, so proper PPE and careful handling are absolutely essential. When disposing of unwanted lead, check with local authorities about appropriate methods. This mold is perfect for serious anglers who go through lots of weights or want to customize their fishing setup without constantly buying new sinkers. Making your own weights can save significant money over time, and you can create exactly what you need for different fishing conditions. Just please, please follow all safety precautions - working with molten lead requires serious care and attention to avoid accidents and health risks.
